CREATE TABLE

— define a new table

Synopsis

CREATE [ { TEMPORARY | TEMP } ] TABLE [IF NOT EXISTS] <table_name> (
    {
        <column_name> <data_type> [COLLATE <collation>] [<column_constraint>] |
        <table_constraint>
    } [, ...]
)

where column_constraint is:

{ NOT NULL |
  NULL |
  DEFAULT <default_expr> |
  ASSUMED UNIQUE |
  ASSUMED PRIMARY KEY |
  ASSUMED REFERENCES <reftable> (<refcolumn> [, ...]) [ MATCH FULL | MATCH SIMPLE ]
}

and table_constraint is:

{ 
    ASSUMED UNIQUE (<column_name> [, ...]) |
    ASSUMED PRIMARY KEY (<column_name> [, ...]) |
    ASSUMED FOREIGN KEY (<column_name> [, ...])
        REFERENCES <reftale> [ (<refcolumn> [, ...]) ]
        [ MATCH FULL | MATCH SIMPLE ]
}

Description

CREATE TABLE will create a new, initially empty table in the current database. The table will be owned by the user issuing the command.

If a schema name is given (for example, CREATE TABLE myschema.mytable ...) then the table is created in the specified schema. Otherwise it is created in the current schema. Temporary tables exist in a special schema, so a schema name cannot be given when creating a temporary table. The name of the table must be distinct from the name of any other table, sequence, index, view, or foreign table in the same schema.

The optional constraint clauses specify constraints (tests) that new or updated rows must satisfy for an insert or update operation to succeed. A constraint is an SQL object that helps define the set of valid values in the table in various ways.

Hyper only officially supports ASSUMED constraints, which means that the constraints are not actually verified when rows are modified. Instead, Hyper assumes that the constraints are enforced by the client, and thus it performs all useful optimizations that are only possible when the constraint in question is enforced. Correct behavior cannot be guaranteed on the database side if the application violates its assumed constraints.

There are two ways to define constraints: table constraints and column constraints. A column constraint is defined as part of a column definition. A table constraint definition is not tied to a particular column, and it can encompass more than one column. Every column constraint can also be written as a table constraint; a column constraint is only a notational convenience for use when the constraint only affects one column.

Parameters

TEMPORARY or TEMP: If specified, the table is created as a temporary table. Temporary tables are automatically dropped at the end of a session and are only visible by this connection. Existing permanent tables with the same name are not visible to the current session while the temporary table exists, unless they are referenced with schema-qualified names. Any indexes created on a temporary table are automatically temporary as well.
IF NOT EXISTS: Do not throw an error if a table with the same name already exists. Note that there is no guarantee that the existing table is anything like the one that would have been created.
<table_name>: The name (optionally schema-qualified) of the table to be created.
<column_name>: The name of a column to be created in the new table.
<data_type>: The data type of the column. For more information on the data types supported by Hyper, refer to Data Types.
COLLATE collation: The COLLATE clause assigns a collation to the column (which must be of a collatable data type). If not specified, the column data type's default collation is used.
NOT NULL: The column is not allowed to contain null values.
NULL: The column is allowed to contain null values. This is the default. This clause is only provided for compatibility with non-standard SQL databases. Its use is discouraged in new applications.
DEFAULT <default_expr>: The DEFAULT clause assigns a default data value for the column whose column definition it appears within. The value is any variable-free expression (subqueries and cross-references to other columns in the current table are not allowed). The data type of the default expression must match the data type of the column. The default expression will be used in any insert operation that does not specify a value for the column. If there is no default for a column, then the default is null.
ASSUMED UNIQUE (column constraint); ASSUMED UNIQUE ( column_name [, ... ] ) (table constraint): The UNIQUE constraint specifies that a group of one or more columns of a table can contain only unique values. The behavior of the unique table constraint is the same as that for column constraints, with the additional capability to span multiple columns. For the purpose of a unique constraint, null values are not considered equal. Each unique table constraint must name a set of columns that is different from the set of columns named by any other unique or primary key constraint defined for the table. (Otherwise it would just be the same constraint listed twice.) ASSUMED constraints are not checked by the database. The user has to ensure that they hold, otherwise queries may yield wrong results.
ASSUMED PRIMARY KEY (column constraint); ASSUMED PRIMARY KEY ( column_name [, ... ] ) (table constraint): The PRIMARY KEY constraint specifies that a column or columns of a table can contain only unique (non-duplicate), nonnull values. Only one primary key can be specified for a table, whether as a column constraint or a table constraint.; The primary key constraint should name a set of columns that is different from the set of columns named by any unique constraint defined for the same table. (Otherwise, the unique constraint is redundant and will be discarded.); PRIMARY KEY enforces the same data constraints as a combination of UNIQUE and NOT NULL, but identifying a set of columns as the primary key also provides metadata about the design of the schema, since a primary key implies that other tables can rely on this set of columns as a unique identifier for rows.; ASSUMED constraints are not checked by the database. The user has to ensure that they hold, otherwise queries may yield wrong results.
ASSUMED REFERENCES reftable [ ( refcolumn ) ] [ MATCH FULL | MATCH SIMPLE ] (column constraint); ASSUMED FOREIGN KEY ( column [, ... ] ) REFERENCES reftable [ ( refcolumn [, ... ] ) ] [ MATCH FULL | MATCH SIMPLE ] (table constraint): These clauses specify a foreign key constraint, which requires that a group of one or more columns of the new table must only contain values that match values in the referenced column(s) of some row of the referenced table. If <refcolumn> is omitted, the primary key of the <reftable> is used. The referenced columns must be the columns of a unique or primary key constraint in the referenced table. Note that foreign key constraints cannot be defined between temporary tables and permanent tables.; A value inserted into the referencing column(s) is matched against the values of the referenced table and referenced columns using the given match type. There are two match types: MATCH FULL and MATCH SIMPLE, which is also the default. MATCH FULL will not allow one column of a multicolumn foreign key to be null unless all foreign key columns are null. MATCH SIMPLE allows some foreign key columns to be null while other parts of the foreign key are not null.; ASSUMED constraints are not checked by the database. The user has to ensure that they hold, otherwise queries may yield wrong results.

Examples

Create table films and table distributors:

CREATE TABLE films (
    code        char(5) ASSUMED PRIMARY KEY,
    title       varchar(40) NOT NULL,
    did         integer NOT NULL,
    date_prod   date,
    kind        varchar(10),
    len         interval
);

CREATE TABLE distributors (
     did    integer ASSUMED PRIMARY KEY,
     name   varchar(40) NOT NULL
);

Define an assumed unique table constraint for the table films. Unique table constraints can be defined on one or more columns of the table:

CREATE TABLE films (
    code        char(5),
    title       varchar(40),
    did         integer,
    date_prod   date,
    kind        varchar(10),
    len         interval,
    ASSUMED UNIQUE(date_prod)
);

Define an assumed primary key table constraint for the table films:

CREATE TABLE films (
    code        char(5),
    title       varchar(40),
    did         integer,
    date_prod   date,
    kind        varchar(10),
    len         interval,
    ASSUMED PRIMARY KEY(code,title)
);

Define an assumed primary key constraint for table distributors. The following two examples are equivalent, the first using the table constraint syntax, the second the column constraint syntax:

CREATE TABLE distributors (
    did     integer,
    name    varchar(40),
    ASSUMED PRIMARY KEY(did)
);

CREATE TABLE distributors (
    did     integer ASSUMED PRIMARY KEY,
    name    varchar(40)
);

Assign a literal constant default value for the column name, arrange for the default value of column did to be 42, and make the default value of modtime be the time at which the row is inserted:

CREATE TABLE distributors (
    name      varchar(40) DEFAULT 'Luso Films',
    did       integer DEFAULT 42,
    modtime   timestamp DEFAULT current_timestamp
);

Define two NOT NULL column constraints on the table distributors:

CREATE TABLE distributors (
    did     integer NOT NULL,
    name    varchar(40) NOT NULL
);

Define an assumed unique constraint for the name column:

CREATE TABLE distributors (
    did     integer,
    name    varchar(40) ASSUMED UNIQUE
);

The same, specified as a table constraint:

CREATE TABLE distributors (
    did     integer,
    name    varchar(40),
    ASSUMED UNIQUE(name)
);

Compatibility

The CREATE TABLE command conforms to the SQL standard, with exceptions listed below.

Temporary Tables

Although the syntax of CREATE TEMPORARY TABLE resembles that of the SQL standard, the effect is not the same. In the standard, temporary tables are defined just once and automatically exist (starting with empty contents) in every session that needs them. Hyper instead requires each session to issue its own CREATE TEMPORARY TABLE command for each temporary table to be used. This allows different sessions to use the same temporary table name for different purposes, whereas the standard's approach constrains all instances of a given temporary table name to have the same table structure.

The standard's definition of the behavior of temporary tables is widely ignored. Hyper's behavior on this point is similar to that of several other SQL databases (in particular PostgreSQL).

The standard's distinction between global and local temporary tables is not in Hyper, since that distinction depends on the concept of modules, which Hyper does not have. For compatibility's sake, Hyper will accept the GLOBAL and LOCAL keywords in a temporary table declaration, but they have no effect.

`NULL` "Constraint"

The NULL "constraint" (actually a non-constraint) is a Hyper extension to the SQL standard that is included for compatibility with some other database systems (and for symmetry with the NOT NULL constraint). Since it is the default for any column, its presence is simply noise.

Zero-column Tables

Hyper allows a table of no columns to be created (for example, CREATE TABLE foo();). This is an extension from the SQL standard, which does not allow zero-column tables.

CREATE TABLE

Synopsis​

Description​

Parameters​

Examples​

Compatibility​

Temporary Tables​

NULL "Constraint"​

Zero-column Tables​